Reasonable use of rubber feet

Reasonable use of rubber feet pads

Rubber foot pad technical parameters:

1), thermal conductivity range: 0.015-2W/MK, accuracy ≤ ± 5%

2), thermal diffusivity measurement accuracy: 5%

3), specific heat measurement accuracy: 7%

4), sample size: 230 * 114 * 65 (MM) rectangular prism, the smallest size is 200 * 100 * 50 (MM) rectangular prism.

5), the measuring temperature can reach up to 1250 °C, and the temperature range can be set according to user requirements.

The rubber product is a raw material prepared by kneading rubber from the rubber mat raw material as a raw material, and is designed according to the characteristics of the desired rubber product during the rubber mixing, and the required hardness of the product is determined. The product is molded and molded by a rubber flat vulcanizing machine. After the product is formed, it is finally subjected to flash processing to smooth the surface of the product without burrs. Rubber is a hot-melt thermosetting elastomer, and plastic is hot-melt and cold-set. Because of the different types of sulfides, the temperature range of the curing of rubber is also quite different, even due to climate change, indoor temperature and humidity. Therefore, the production conditions of rubber products must be adjusted at any time. If not, the quality of the products may be different.